艾伯特電通股份有限公司
代理硬體
列印
週一, 22 九月 2008 06:55
文章索引
X-IST FaceTracker 臉部動作擷取器
頁面 #
全部頁面
X-IST FaceTracker Hardware臉部動作擷取器
 
adjustable, lightweight headset with removable cushions in various sizes for a perfect fit
adjustable lever arm
near infrared sensitive camera with CCIR 600 TV lines video output
rotatable camera, adjustable camera focus
near infrared dimmable light source built into camera
PC slot backpanel for power supply, including a dimmer for the infrared light source
one main FaceTracker cable (4 meters) from headset to PC
infrared reflective marker tape (self-adhesive)
serial cable
parallel port dongle, manual, software CD
additional tools, standalone Motion Data Player
Required additional hardware:
PCI Matrox Meteor II Standard framegrabber-card (available as option)
PC, 800MHz, 20GB HD, 128 MB RAM, 2D Graphics Card XGA, 1 PCI Slot
Optional additional hardware:
PCU (desktop power supply and light control unit, replaces Slot backpanel power supply) 


 
列印
週一, 22 九月 2008 06:52

5DT Data Glove 5

可以測量每一手指關節彎曲的程度,在每根手指都有一個感應器,可以模擬人手指的傾斜以及左右搖動的狀況。它可以模擬像滑鼠一樣的使用,也可以當作搖捍來使用.............

 

5DT Data Glove 5 可以測量每一手指關節彎曲的程度,在每根手指都有一個感應器,可以模擬人手指的傾斜以及左右搖動的狀況。它可以摸擬像滑鼠一樣的使用,也可以當作搖捍來使用。 

 

此系統透過一條支援RS 232連接線與電腦相連結。戴起來很舒服,價格很便宜,具有開放式架構。另外一組無線規格的型號為5DT Data Glove UItra 5-W, 這個無線版本是透過無線設備(支援RS232)與電腦連結(無線距離範圍為20m),右手及左手可以同時連結。5DT Data Glove 因為相當有彈性,所以適用各種不同大小的手。

5dt

 

 

 

 

 

 

產品特色

彎曲度

8-bit A/D12-bit A/D

材質

Black stretch lycra

彎曲感應器

Fiber optics based  Sensors in total  Sensor per finger

採樣速率

The full hand (5 sensors plus 2 tilt angles) may be sampled at up to 200 times per second 2-Axis tilt sensor:±60º Linear range (8-bit)

無線傳輸頻率

Right-handed wireless glove: 418MHz

Left-handed wireless glove: 433.92MHz

無線有效距離

Up to 30m

電腦介面

RS 232 (TX, RX, RTS, GND) 9200 bps (transmit and receive)
[9600 bps for wireless version]

電力

7.5V DC center positive (150mA)

 
列印
週一, 22 九月 2008 06:51
  
Spec規格明細 
解析度(pixels)800x600 (svga)
視野(diag) (deg)40 (~)
立體顯示功能Stereoscopic yes (frame seq)
內建3軸位置追蹤器 3DOF gypscopic trackerYes
對比Contrast Ratio 200:01:00
色深Colour Depth (bits/pix)24
重量Device Weight (kg)0.227 (<)
亮度Brightness (fL)15
顯示器類型Display Type OLED 
角度解析度Angular Res (pix/deg)25
VGA輸入 inp. yes 
DVI 輸入inp. no 
Vid 輸入inp. no 
SVid 輸入inp. no 
運作時最低溫Operating Temperature (min) (° C)0
運作時最高溫Operating Temperature (max) (° C)40
色彩(百萬)Number of colours (millions)16.7
 
列印
週一, 22 九月 2008 06:44
InSpeck 3D Mega Capturor II                                                       
spec 
擷取率Acquisition Rate (Points)1300000 (per scan)
點距Point to Point distance (mm)0.3 ((0.9 LF unit))
最近工作距Working Range Near (mm)900 ((1100 LF unit))
工作距(遠)Working Range Far (mm)1300 ((1700 LF unit))
色彩擷取Colour Capture Yes (1280 x 1024 pixels)
擷取時間Acquisition Time (Sec)0.7
 小範圍Small Field大範圍Large Field
視野FOV435 x 3501190 x 450
景深DOF4501000
X軸向解析度Resolution in X0.30.9
Y軸向解析度Resolution in Y0.30.9
Z軸向解析度Resolution in Z0.41
Stand Off9001100
Ref. Distance (z=0)11001500
貼圖大小Texture (Pixels)1280 x 10241280 x 1024
幾何點Geometry (Pts)1.3 Million1.3 Million
擷取時間Acqu. Time (sec)0.70.7
註解:人體全身彩色3D掃描器,曾使用此設備掃瞄美國大聯盟900球員全身3D模型,做為3D棒球遊戲的人體模型建構工具
 
 
列印
週一, 22 九月 2008 06:41

 

Polhemus FastScan

      FastScan 結合了Fastrakr 動態追蹤的技術,用來偵測物體的所在位置及方

位,經過偵測描掃下來的物件影像,可以透過電腦系統建置 3D 物體。FastScan

可以掃瞄以往無法掃描的地方,可以掃瞄移動中的物體,且對於非金屬物體掃

瞄的效果是非常的理

 

 

 

 

 

  • 產品規格

分析

過程

Custom electronics video processor Polhemus FASTRAK® magnetic tracker

尺寸

450 mm (18 in) in length 2 miniature monochrome cameras
1 laser diode: 670 nm, 1 mW, Class II Tracker Receiver

解析度

Laser line length increases with Wand-Object range, typically ..150 mm at 200   mm   range (6 in at 8 in) Resolution along the laser line depends on Wand-Object   range, typically 0.5   mm   at 200 mm range (0.02 in at 8 in)
Scanning speed is 50 lines/sec, line-to-line resolution depends on scanning speed, typically 1 mm at 50 mm/sec (0.04 in at 2 in/sec). Resolution

系統

Tracker Transmitter Tracker Receiver for attachment to movable objects

範圍

Up to 760 mm (30 in) Wand-Transmitter and Receiver - Transmitter range
75 mm to 680 mm (3 in to 27 in) Wand-Object range

準確度

With Transmitter as Reference, accuracy depends on Wand-Object range, typically 1 mm at 200 mm range (0.04 in at 8 in)
With Receiver as Reference, accuracy also depends on Receiver-Object range

界面

Connects to ECP capable parallel port (LPT1), additional card available (LPT2) DMA ECP driver provided

軟體

3D graphics: point, wireframe, flat or smooth surface display

3D controls: rotate, zoom, center scan Selectable resolution, faceted surface simplification, outlier removal Export polygon mesh to 3D Studio Max®, ASCII Points,   AutoCAD Points and 3D Faces, IGES Points, Lightwave   Object, Matlab Mesh,   STL, Virtual Reality   Modeling Language,   Wavefront Object,   Open Inventor and others.

環境

Operation in the presence of metal objects or electromagnetic fields may interfere with the scanner's tracking and degrade performance. Providing the Transmitter, Wand and Receiver are kept sufficiently far from metal objects or fields they should not pose a problem. Because scanning relies on the cameras seeing the laser line, some surfaces may not be suitable for laser scanning, eg. translucent, reflective, dark or deeply convoluted surfaces.

最低系

統需求

Pentium II, 266MHz, CD-ROM, 64MB RAM minimum, ECP capable parallel port, Windows NT 4, preferably OpenGL accelerated graphics card

 

 
<< 最先 < 前一個 1 2 3 下一個 > 最後 >>

頁 2 總共 3

會員登入

公司資訊

  • 地址:24250 新北市新莊區思源路593巷6弄14號2樓
  • 電話:(02)8522-1819
  • 傳真:(02)8522-1719
  • 業務聯繫:劉先生 分機12 行動電話:0983-169224

位置地圖

map
檢視較大的地圖

意見調查

您希望本站增加哪些內容